Phone    (630) 467-0600

        Fax        (630) 467-0606

        E-Mail    info@cgsystems.com

This page contains a listing of new and used Machinery and Equipment available for immediate or reduced lead-time delivery.  The items listed here may include demonstration equipment, surplus equipment, refurbished equipment, used equipment, etc..  Special pricing may apply, and is limited to quantities on hand.  All items are subject to prior sale.  Warranties may be available on some equipment.  Consult a member of our sales team for warranty availability, terms, conditions, and duration.  Additional photographs are available upon request and all listings may be inspected on-site at C&G Systems' facility in Itasca, Illinois.

Plasma Cutting Machinery

C&G Systems Raptor Plasma Cutting Machine - New 1999 - This machine is currently in service and under power at C&G Systems.  The unit is being replaced with a current production model.  The Raptor has a unitized 72" x 120" (1.8M x 3.0M) down-draft cutting table and includes a 15-100 amp Hypertherm HD3070 Automated Plasma System.  Machine has recently undergone extensive PM at which time all "wear" items were inspected and worn items, including bearings, were replaced.  Contact C&G for pricing and limited warranty details.  sales@cgsystems.com

 

C&G Systems Crossfire Plasma Cutting Machine - New 2007 - This machine is C&G Systems' demo/show machine.  It is currently in service and under power with very low hours on the machine.  Effective cutting width of 72" (1.8M) and length to suit.  The machine is equipped with a Thermadyne UltraCut 300 (30-300 amp output) Automated Precision Plasma System, a single oxy-fuel torch, Burny 10 LCD plus CNC Control, and Inova Torch Height Control System.  The machine does not include the show rail/table system.  New pedestals, rails, and cutting table can be fabricated to buyers' specifications.  Alternate plasma systems and options are also available.  Contact C&G for pricing and limited warranty details.  sales@cgsystems.com

 

C&G Systems Aviator XLT Plasma Cutting Machine - New 2008 - This is a new small-format demo/show/school machine available for immediate delivery.  Includes integrated 48" x 36" (1.2M x 0.9M) cutting table and Thermadyne CutMaster 151 (10-120 amp output) Plasma System.  Alternate plasma systems and options are also available.  Contact C&G for pricing and warranty details.  sales@cgsystems.com

Power Supplies

Thermadyne AutoCut 100 Automated Plasma System - New 2006 - S/N 03776998 - 230/460 Volt, 3-Phase, 10-100 Amp Output.  Compatible with Thermal Dynamics XT-301 consumables, available for cutting ferrous and non-ferrous materials from gauge thickness to 1" plate.  Water Mist Secondary for low-cost, dross-free cutting of non-ferrous metals.  Contact C&G for pricing and limited warranty details.  sales@cgsystems.com

 

Thermadyne UltraCut 100 Automated Precision Plasma System - New 2005 - S/N 03361987 - 230/460 Volt, 3-Phase, 10-100 Amp Output.  Compatible with Thermal Dynamics XT-300 extreme-life consumables, available for cutting ferrous and non-ferrous materials from gauge thickness to 3/4" plate.    Water Mist Secondary for low-cost, dross-free cutting of non-ferrous metals.  Contact C&G for pricing and limited warranty details.  sales@cgsystems.com

 

Thermadyne UltraCut 150 Automated Precision Plasma System - New 2006 - S/N 03953827 - 208/230/460 Volt, 3-Phase, 10-150 Amp Output.  Compatible with Thermal Dynamics XT-300 extreme-life consumbales, available for cutting ferrous and non-ferrous materials from gauge thickness to 1" plate.  Water Mist Secondary for low-cost, dross-free cutting of non-ferrous metals.  Contact C&G for pricing and limited warranty details.  sales@cgsystems.com

 

Thermadyne GCM-1000 Gas Control Module -  2 Available - These units were used on show machines and never used in production.  Contact C&G for pricing and limited warranty details.  sales@cgsystems.com

Unit 1:  S/N 03765076 - New 2006

Unit 2:  S/N 03562800 - New 2005

Exhaust Systems

KICE 6-Bag Baghouse Filtration System - New 2007 - Never Used - FC-9 5Hp Blower System, 230/460 Volt, 3-Phase.  Contact C&G for pricing and warranty details.  sales@cgsystems.com

Donaldson-Torit DFT3-6 Exhaust System - New 2000 - S/N IG739158-001 - 460 Volt, 3-Phase, 5-Hp motor, uses P190818 filters.  This unit was used on C&G Systems'  demonstration/show machine.  The unit is in excellent condition and has low hours of usage.  Contact C&G for pricing.  sales@cgsystems.com

Information Request

Please e-mail us at sales@cgsystems.com for more information about machinery and equipment in inventory.  One of our knowledgeable sales managers will be happy to provide you with any additional information you may need or arrange a time to meet with you to discuss your project.

[Home] [Products] [Services] [Partners] [News & Events] [Contact Info]

Send mail to webmaster@cgsystems.com with questions or comments about this web site.
Copyright © 2008 C&G Systems, Inc.
Last modified: 03/13/08